Tsarin gyare-gyaren busa na Kunshan yana ɗaukar nau'ikan fasaha da kayan aiki, galibi gami da masu zuwa:
Polyethylene (PE) Polyethylene shine nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in filastik.Polyethylene ne opaque ko translucent, haske-nauyi crystalline filastik da kyau kwarai low zafin jiki juriya (mafi yawan aiki zafin jiki iya isa -70 ~ -100 ℃), mai kyau lantarki rufi da sinadaran kwanciyar hankali, kuma zai iya jure mafi yawan acid da alkalis lalata, amma ba zafi. m.Polyethylene ya dace da aiki ta hanyar yin allura, gyare-gyaren busa, gyare-gyaren extrusion da sauran hanyoyin.PE za a iya raba zuwa: low yawa polyethylene LDPE;high yawa polyethylene HDPE;madaidaiciyar ƙananan ƙarancin polyethylene LLDPE.
Polypropylene (PP) Polypropylene shine thermoplastic da aka samu ta hanyar polymerization na propylene.Yawancin lokaci mara launi, mai ƙarfi mai ƙarfi, mara wari kuma mara guba, tare da yawa na 0.90 ~ 0.919 g/cm.Ita ce filastik mafi sauƙi na gaba ɗaya tare da fa'idodi masu ban mamaki.Yana yana da halaye na juriya ga dafa abinci a cikin ruwa, lalata juriya, ƙarfi, rigidity da kuma bayyana gaskiya ne mafi alhẽri daga polyethylene, da hasara ne matalauta low zafin jiki tasiri juriya, sauki shekaru, amma za a iya inganta ta gyaggyarawa da kuma Bugu da kari na Additives.Akwai hanyoyi guda uku na samar da polypropylene: Hanyar slurry, hanyar ruwa mai yawa da hanyar lokaci na gas.
Polyvinyl chloride (PVC) Polyvinyl chloride robo ne da aka samu ta hanyar yin polymerizing vinyl chloride, kuma taurinsa na iya canzawa sosai ta hanyar ƙara kayan filastik.Abubuwan da ke da wuyar gaske har ma da samfurori masu laushi suna da amfani mai yawa.Hanyoyin samarwa na polyvinyl chloride sun haɗa da dakatarwa polymerization, emulsion polymerization da kuma yawan polymerization, tare da dakatarwa polymerization a matsayin babbar hanya.
Polystyrene (PS) Polystyrene na gaba ɗaya shine polymer na styrene, wanda yake bayyana a fili, amma yana da lahani na kasancewa gaggautsa.Sabili da haka, ana iya yin polystyrene mai tasiri (HTPS) ta ƙara polybutadiene.Babban hanyoyin samar da polystyrene sune polymerization girma, polymerization na dakatarwa da polymerization bayani.
Matsin busawa:
Don samar da samfuran busa guduro na gaba ɗaya na ABS, matsa lamba yawanci 0.4-0.6MPA.Don ABS da aka yi amfani da su don robobin injiniya, kamar ABS mai jure zafi, gami da PC/ABS, yawan ruwan sa ba shi da kyau, kuma yawan busawa gabaɗaya ya kai fiye da 1MPA.Don samfuran da ke da alamu masu kyau a saman, idan ana buƙatar ƙirar don bayyanawa, ya kamata kuma a ƙara matsa lamba.Don samfuran da ke da buƙatu masu girma, kamar fuka-fukan wutsiya na mota da aka ƙera, waɗanda ke buƙatar maganin fenti na gaba, ana buƙatar samfuran su kasance kusa da mold don yin kwafin ƙyallen ƙura a lokacin busa, kuma matsin lamba shine yawanci ana buƙata don isa 1.5-2.0MPA.Kayayyakin gyare-gyaren busa na Shanghai suna da yanki mafi girma, da ƙarin hadaddun samfuran, kuma mafi girman kaurin bangon, ƙara ƙarfin busawa, kuma akasin haka.Matsakaicin busawa kuma yana haifar da ƙarewar saman ƙasa da kwanciyar hankali.A kan farfajiya mai amfani, ta yin amfani da matsa lamba mafi girma, gyare-gyaren tsari zai zama sauƙi, kuma yana da sauƙi don samun samfurori tare da mafi girman inganci.
Kunshan Zhida Plastic Products Co., Ltd. shine masana'anta da aka sadaukar don haɓakawa da samar da samfuran gyare-gyaren busa.Kamfanin yana sayar da samfuran gyare-gyare daban-daban duk shekara.Kamfanin yana ɗokin sabbin abokan ciniki da tsofaffi waɗanda ke zuwa don tuntuɓar da siye tare da sabis mai inganci.
Lokacin aikawa: Juni-20-2023